Armco Barrier Terminal Ends & Accessories
Armco barriers are traffic safety barriers allowing to keep vehicles within their roadway and to prevent dangerous obstacles and costly collisions.
Armco Safety Barriers are usually finished off with a terminal end. The most common type of terminal for a safety barrier is the Fishtail end (Type A). However, if the ends need to be Pedestrian Friendly, Pedestrian Ends or Plastic End Caps can be fitted to the Armco barrier. All steel type terminal ends can be powder coated to any colour.
At SVL we have now introduced a new range of Polymer terminal ends. We also now have Armco safety barrier ends as well as Polymer fishtail, Pedestrian ends and Plastic end caps for posts, these are available in both yellow or black.
Armco Barriers can be sent in different directions by the use of Armco Corners. These corners are available in 90 & 45 degrees, however, if you need your Armco barrier to go in a different angle the flexible corners are used. Armco Barrier corners are available in both internal and external formats.
Cast in RSJ post are used when you want to give a more permanent fix into earth and concrete. Cast RSJ post are available in three different sizes to meet your specification, 1200mm , 1500mm and 1800mm overall height.
We do not offer installation on “cast in” legs.
Recommendation : 300mm x 300mm x Dept of leg you are casting in + 100mm
Armco barriers is the generic name for a steel safety barrier system. The aim of the barrier is to protect people, assets and property against injury and damage from a moving vehicle.
The versatility of an Armco Crash Barrier allows it to be used as a single or a multiple height barrier. The legs can be either bolted down or cast in to the ground. The legs can also be adapted to carry an integral handrail for effective pedestrian protection. All Armco barrier products are manufactured to meet BS6399 and BS6180:1999 British Safety Standards and are galvanised to EN ISO1461.
The Armco barrier rails are 3500mm long with an effective length of 3200mm long ( overlap with another armco beam 3500mm). The standard thickness of armco barrier beams is 3mm to ensure compliance with the relevent safety standards. SVL supply and install armco steel barrier across the island of Ireland to suit a range of applications such as car parks, delivery yards, stockroom and distribution centres. We also supply a full range of armco barrier accessories such as steel and polymer end caps . pedestrian ends , safety capping, armco internal and external corners and fishtail ends.